503.285.6685
  • View Cart

Online Catalog

Lighting::
LED PAR,RGBWA+UV, BATTERY

Where to find LED PAR,RGBWA UV, BATTERY in Portland

Image for reference only
Actual item may look different
Click on image for larger view

Rental Rate: $40.00
Comments:
  • Features & Technical Specifications:
  • (4) 18 Watt All in One RGBWA+UV LEDs
  • All in One LEDs RGBWA+UV Fixture - RED, GREEN, BLUE, WHITE, AMBER & UV
  • 3CH, 4CH, 5CH, 8CH, 11CH 13CH DMX Modes
  • Flicker Free Refresh Rate >400 Hz (HDTV Video, Guaranteed No Flicker)
  • Ideal for HDTV recordings with Flicker Free operation
  • DMX input and output
  • Power linking input and output
  • Sound Active with 2 Sound Active Modes (1 Without Strobe/1 With Strobe)
  • Auto Mode with 8 Speed Settings
  • Smooth Color Mixing
  • The CUBEecho has absolute ZERO noise - No Fans to make any Noise.
  • Fade mode with 8 Speed Settings
  • Manual Color Mix Mode on Push Button Display
  • Built In Color Macros, Auto & Manual control
  • 16 Digit, 2 Line, Full Text read out Back-Lit LCD Push Button Display
  • Ability to create & store into memory 5 Custom/manual Colors.
  • Power In & Power Out (As of 03/29/2013)
  • Master/Slave
  • Up to 20 Hours of Battery Life on one charge
  • Flush Mounted Wireless DMX Antenna recessed to keep the antenna safe
  • 2.4gHz Wireless DMX Receiver that is also a Transmitter (300ft Line of Sight)
  • simultaneous master signal transmitting from Master to all other lights in range
  • IR Remote control. Also the Signal Received from the IR Remote can Transmit to the other lights by Wireless DMX.
  • (Compatible with CUBE5, ElitePar5 & CUBEecho)
  • Dual Mount Bracket included for hanging or sitting on the floor
  • Rubber feet for non intrusive lay flat design.
  • Beam Angle - 45 Degree (Wide Wash)
  • PHOTOMETRICS: 11,785 LUX @ 1meter (Full Power)
  • Dimensions (L x W x H) 6.75" x 6.75" x 4.25"
  • Weight 4.9lbs
  • Master Slave settings on the CUBEecho MK2 W-DMX
  • First to make this simple please get two lights in front of you and have all others off. Once you do this the first time you will see how easy it is and you can try with 10-200 lights.
  • On the back of the CUBEecho MK2 W-DMX There is two red buttons with W-DMX built into the light.
  • One Button is a Latching button you press it in and it will lock in the down position. Then you can press it again and it will pop up.
  • Other Button is the Spring button you can press it down and it springs up when you let go of the button.
  • Step 1. Make sure all your lights are set to Slave on the push button display settings.
  • Step 2. On the Slave lights you need to make sure the Latching button is popped out.
  • Step 3. Next you need to press and hold (about 7 seconds) the Spring button until the Transceiver Indicator LED is off (Blacked out)
  • Step 4. Now select a light to make a Master by setting it to Master in the push button display settings.
  • Step 5. Next on the Master light you press the Latching button down.
  • Step 6. On the Master Light hold the Spring button for 2 seconds and release.
  • (You will see all of the Transceiver Indicator LED blink while connecting and then stay on when connected. This Master light is now connected to all the Slave lights.)
  • You can now use the Push button display or IR Remote Plus (When IR INFA is set to Enable) to control the lights
Add of the above items to my quote request.



* Prices are subject to change.

* Please call us for any questions on our led par rgbwa uv battery rentals in Portland OR, Gresham, Beaverton, Tigard, Hillsboro OR and Vancouver Washington.